Certificate III in Engineering - Mechanical Trade

MEM30219

|

Certificate III

The MEM30205 is intended to give an industry perceived skills profile identified with exchange fill in as an Engineering Tradesperson.

Get in touch with us

Interested in this qualification?

Get in touch with us

Interested in this qualification?

Check Your Eligibility

Check your eligibility with us today & enquire about the Qualifications that matches with your industry

Qualification Overview

Qualification Code:

MEM30219

Qualification Name:

Certificate III in Engineering - Mechanical Trade

AVAILABLE OPTIONS TO COMPLETE THIS COURSE?

Classroom – Study | Online | RPL | Credit Transfer

Offered By

The MEM30219 is intended to give an industry perceived skills profile identified with exchange fill in as an Engineering Tradesperson. Skills improvement ought to be embraced through an Australian Apprenticeship arrangement where the mix of on and off-the-work training would be determined in the Training Plan related with the Contract of Training between the employer and understudy.

How STUDYIN can help You?

STUDY IN can help you to find the right institution based on your requirements. We can help you to prepare your application for Enrolment – Admission – Credit Transfer – RPL – Upskills/Upgrade Book an online appointment to discuss further.

Why Study the MEM30219 Certificate III in Engineering Mechanical Trade?

The MEM30219 Certificate III in Engineering Mechanical Trade is focused on the real world and relevant contexts that make the student highly skilled and be ready by meeting industry benchmark. Going through the program will give the required skills you can use immediately and encourages you to think diversely. This MEM30219 has become developed by industry specialists and endorsed by sector bodies and can be sure you have the practical knowledge to ‘hit the ground running’ in modest, medium or big organisations across the industry. Experience alone is no longer efficient; potential employers are looking for evidence of professional proficiency via a current formal qualification.
The MEM30219  Certificate III in Engineering Mechanical Trade course is for those employed as an apprentice in the manufacturing, engineering and related industry areas. Apprentices will acquire skills and knowledge in workplace communication, workplace health and safety, quality procedures systems and planning, engineering measurement, computations and computer technology.
You should give a scope of proof to help your assessor to settle on a choice about your capability if you applying for RPL. The sorts of proof you might be approached to give can include: Proof of abroad capabilities.
  •  Transcripts or evaluations from related past capabilities.
  • Apprenticeship papers.
  • ID Resume Payslips/work contract/ABN if independently employed Letter of Employment Current business contracts Letters of reference.
  • Recordings or photographs of your work.
  • Statements/solicitations and stock requests Temperature sheets
  • Booking sheets/appointmemt setting sheets
  • Cleaning plans Kitchen station task list OHS necessities Approaches and methodology Nourishment administration wellbeing structures
  • Preparation sheets
  • Menus and plans etc asked or required by the RTO
 
If you want to STUDY then enrolment documentation checklist needs to be completed. Documents such as ID, Academic Documents, Resume or any other documents asked by the RTO/College must be submitted. You can submit directly or provide to STUDYIN to submit on your behalf to complete your enrolment if you decide to parsue.
For a student, it is crucial to know the occupation he/she will eligible once finish a qualification successfully. If you complete this qualification, you will able to work with this role.
  • Fitter and Turner
  • Maintenance Mechanic/motor Mechanic
  • Mechanical Fitter
  • Metal Fabricator

The minimum requirements for achievement of the Certificate III in Engineering – Mechanical Trade are:

  • completion of all core units of competency listed below, and
  • completion of Group A Mechanical Trade stream units to the value of at least 40 points, and
  • completion of units from Group B Certificate III Trade specialisation units listed in Appendix 1, Volume 1 of the Training Package, to bring the total value to at least 73 points

Points associated with prerequisites count towards the total (refer to units and prerequisites listing in Appendix 2, Volume 1).

Appropriate Group B elective units to the value of 16 points may be chosen from other endorsed Training Packages and accredited courses where those units are available for inclusion at Certificate III. Note that the elective units listed below include all of the units that are approved for selection from the MEM Training Package for use in this qualification. This meets the NQC requirement that one sixth of the total units must be able to be selected from other qualifications in the same Training Package.

Registered Training Organisations must seek a determination from Manufacturing Skills Australia in respect of the allocation of points values for units of competency drawn from other Training Packages or accredited courses.

Only select units that would be suitable for Mechanical Trade occupational outcomes.

Additional qualification descriptors

The following additional descriptors are approved for use with this qualification: Refrigeration and Air Conditioning; Instrumentation; Maintenance; Patternmaking; Toolmaking; Watchmaking; Machining.

Core units

  • select all of the units from this list

Unit code

Unit title

MEM12023A

Perform engineering measurements

MEM12024A

Perform computations

MEM13014A

Apply principles of occupational health and safety in the work environment

MEM14004A

Plan to undertake a routine task

MEM14005A

Plan a complete activity

MEM15002A

Apply quality systems

MEM15024A

Apply quality procedures

MEM16006A

Organise and communicate information

MEM16007A

Work with others in a manufacturing, engineering or related environment

MEM16008A

Interact with computing technology

MEM17003A

Assist in the provision of on the job training

MSAENV272B

Participate in environmentally sustainable work practices

Elective Units

Group A  – Mechanical Trade stream units

  • select units from this list to the value of at least 40 points

Unit code

Unit title

P

MEM07001B

Perform operational maintenance of machines/equipment

2

MEM07002B

Perform precision shaping/planing/slotting operations

4

MEM07003B

Perform machine setting (routine)

4

MEM07004B

Perform machine setting (complex)

8

MEM07005C

Perform general machining

8

MEM07006C

Perform lathe operations

4

MEM07007C

Perform milling operations

4

MEM07008D

Perform grinding operations

4

MEM07009B

Perform precision jig boring operations

4

MEM07010B

Perform tool and cutter grinding operations

4

MEM07011B

Perform complex milling operations

4

MEM07012B

Perform complex grinding operations

4

MEM07013B

Perform machining operations using horizontal and/or vertical boring machines

4

MEM07014B

Perform electro-discharge (EDM) machining operations

4

MEM07015B

Set computer controlled machines/processes

2

MEM07016C

Set and edit computer controlled machines/processes

4

MEM07018C

Write basic NC/CNC programs

4

MEM07019C

Program NC/CNC machining centre

2

MEM07020C

Program multiple spindle and/or multiple axis NC/CNC machining centre

2

MEM07021B

Perform complex lathe operations

4

MEM07022C

Program CNC wire cut machines

2

MEM07023C

Program and set up CNC manufacturing cell

6

MEM07024B

Operate and monitor machine/process

4

MEM07025B

Perform advanced machine/process operation

6

MEM07026B

Perform advanced plastic processing

6

MEM07027B

Perform advanced press operations

6

MEM07028B

Operate computer controlled machines/processes

2

MEM07029B

Perform routine sharpening/maintenance of production tools and cutters

4

MEM07030C

Perform metal spinning lathe operations (basic)

8

MEM07031C

Perform metal spinning lathe operations (complex)

4

MEM07032B

Use workshop machines for basic operations

2

MEM07033B

Operate and monitor basic boiler

6

MEM07034A

Operate and monitor intermediate class boiler

4

MEM07040A

Set multistage integrated processes

6

MEM09002B

Interpret technical drawing

4

MEM09022A

Create 2D code files using computer aided manufacturing system

4

MEM10004B

Enter and change programmable controller operational parameters

2

MEM10006B

Install machine/plant

4

MEM12003B

Perform precision mechanical measurement

2

MEM12006C

Mark off/out (general engineering)

4

MEM13007B

Maintain water treatment systems for cooling towers

2

MEM18001C

Use hand tools

2

MEM18002B

Use power tools/hand held operations

2

MEM18003C

Use tools for precision work

4

MEM18004B

Maintain and overhaul mechanical equipment

4

MEM18005B

Perform fault diagnosis, installation and removal of bearings

4

MEM18006C

Repair and fit engineering components

6

MEM18007B

Maintain and repair mechanical drives and mechanical transmission assemblies

4

MEM18008B

Balance equipment

2

MEM18009B

Perform levelling and alignment of machines and engineering components

4

MEM18010C

Perform equipment condition monitoring and recording

4

MEM18011C

Shut down and isolate machines/equipment

2

MEM18012B

Perform installation and removal of mechanical seals

2

MEM18013B

Perform gland packing

2

MEM18014B

Manufacture press tools and gauges

8

MEM18015B

Maintain tools and dies

4

MEM18018C

Maintain pneumatic system components

4

MEM18019B

Maintain pneumatic systems

4

MEM18020B

Maintain hydraulic system components

4

MEM18021B

Maintain hydraulic systems

4

MEM18022B

Maintain fluid power controls

8

MEM18024B

Maintain engine cooling systems

2

MEM18025B

Service combustion engines

2

MEM18026C

Test compression ignition fuel systems

4

MEM18027C

Overhaul engine fuel system components

8

MEM18028B

Maintain engine lubrication systems

2

MEM18029B

Tune diesel engines

4

MEM18030B

Diagnose and rectify low voltage electrical systems

8

MEM18031B

Diagnose and rectify low voltage starting systems

2

MEM18032B

Maintain induction/exhaust systems

4

MEM18033B

Perform engine bottom-end overhaul

4

MEM18034B

Perform engine top-end overhaul

8

MEM18035B

Diagnose and rectify braking systems

6

MEM18037B

Diagnose and rectify low voltage charging systems

2

MEM18038B

Maintain wheels and tyres

2

MEM18039B

Diagnose and rectify track type undercarriage

4

MEM18040B

Maintain suspension systems

4

MEM18041B

Maintain steering systems

4

MEM18042C

Diagnose and rectify manual transmissions

4

MEM18043C

Diagnose and rectify automatic transmissions

8

MEM18044C

Diagnose and rectify drive line and final drives

4

MEM18045B

Fault find/repair electrical equipment/components up to 250 volts single phase supply

4

MEM18046B

Fault find/repair electrical equipment/components up to 1000 volts a.c./1500 volts d.c.

10

MEM18047B

Diagnose and maintain electronic controlling systems on mobile plant

4

MEM18048B

Fault find and repair/rectify basic electrical circuits

12

MEM18049C

Disconnect/reconnect fixed wired equipment up to 1000 volts a.c./1500 volts d.c.

3

MEM18050C

Disconnect/reconnect fixed wired equipment over 1000 volts a.c./1500 volts d.c.

3

MEM18051B

Fault find and repair/rectify complex electrical circuits

6

MEM18052B

Maintain fluid power systems for mobile plant

4

MEM18054B

Fault find, test and calibrate instrumentation systems and equipment

8

MEM18055B

Dismantle, replace and assemble engineering components

3

MEM18056B

Diagnose and repair analog equipment and components

10

MEM18057B

Maintain/service analog/digital electronic equipment

6

MEM18058C

Modify electronic equipment

4

MEM18060B

Maintain, repair control instrumentation – single and multiple loop control systems

8

MEM18062B

Install, maintain and calibrate instrumentation sensors, transmitters and final control elements

8

MEM18063B

Terminate signal and data cables

4

MEM18064B

Maintain instrumentation system components

6

MEM18065B

Diagnose and repair digital equipment and components

10

MEM18066B

Diagnose and repair microprocessor-based equipment

6

MEM18067B

Tune control loops – multi controller or multi element systems

6

MEM18071B

Connect/disconnect fluid conveying system components

2

MEM18072B

Manufacture fluid conveying conductor assemblies

4

MEM18086B

Test, recover, evacuate and charge refrigeration systems

4

MEM18087B

Service and repair domestic and light commercial refrigeration and air conditioning equipment

6

MEM18088B

Maintain and repair commercial air conditioning systems and components

4

MEM18089B

Maintain and repair central air handling systems

6

MEM18090B

Maintain and repair industrial refrigeration systems and components

6

MEM18091B

Maintain and repair multi stage, cascade and/or ultra-cold industrial refrigeration systems

4

MEM18092B

Maintain and repair commercial and/or industrial refrigeration and/or air conditioning controls

6

MEM18094B

Service and repair commercial refrigeration

6

MEM18095A

Maintain and repair cooling towers/evaporative condensers and associated equipment

4

MEM18096A

Maintain, repair/replace and adjust refrigerant flow controls and associated equipment

6

MEM18097A

Manufacture cavity dies

8

MEM18098A

Prepare to perform work associated with fuel system installation and servicing*

2

MEM30219 - Certificate III in Engineering - Mechanical Trade (Release 3)

Other Programs

4.9

105+ reviews

Excellent
Based on 115 reviews
Sarvjeet Kaur
Sarvjeet Kaur
2024-02-28
Thanks to Sami, who had recommend me to do a certificate 3 in individual support , because of him now I got a job in aged care and m also working as a disability support worker, i highly recommend Sami for further future advices, also he is always available to help me out regarding any certificate or any query, i highly appreciate him for giving me best advices and best suggestion to get a certificate 3 in individual support which helped me a lot in getting a job
Manon Murcia
Manon Murcia
2024-02-03
I wanted to thank you Aidan who have guided me through the RPL process, for his patience, his investment in my application, to have follow me up until I received the hard copy of my Cert III in childcare !! I'll definitely get in touch for my diploma.. Heavy recommend Study in.
Manisha Rana
Manisha Rana
2024-01-24
Study in is one of the best place for getting your skills recognised and equipped for the workplace. I definitely recommend it, and Study in takes excellent care of everyone that visits them. Many thanks to Asif. They show me the light at the end of the tunnel when I was really lost.
Maryann Wambui
Maryann Wambui
2023-11-29
Excellent customer service by Sami. Highly recommend.
Rose Kimwei
Rose Kimwei
2023-11-09
When it comes to finding honest reliable agency study in pty Ltd,is the place to go,they have incredible services.many thanks to Sami.
Shokerya Mohammadi
Shokerya Mohammadi
2023-11-06
The best service ever, they are kind and friendly and will provide help all the times. I had a consultant named Sami, he guided me through the process and helped me heaps. 100% recommend their service.
Ali Youssef
Ali Youssef
2023-11-02
Thanks to the team for the help they were very helpful, kind and dedicated to their work and at the end the result was great.
Nazmus Sadat
Nazmus Sadat
2023-09-06
Frankly Speaking, I spoke to all the top class Education consultancies in Bangladesh and also many education agents personally too. But from all the agencies, I was told that it is not possible to do Masters in Australia with my profile. I distinctly remember being told by all other Educational agencies that I would not be accepted into any university in Australia. At that time, I was very really upset but did not give up. After that, I contacted Study in Pty Ltd at their Bangladesh office. Then, at the very first day KiratPal Singh Education counselor of Study in Pty Ltd. told me that don't worry, there is no problem with your profile. He gave me hope. Then after 9 days of application, I received the offer letter. It's been a hectic journey from the very first day I decided to pursue a higher degree until the day I got a visa. I want to show my gratitude to Md. Neamat Ullah and Fabila Alam for their amazing cooperation. I reached out to them in the month of April for consultation. From that very first day, KiratPal Singh guided me throughout the process. You guys are the best. I would like to thank Study in Pty Ltd. and the entire team for helping me gets my Australian student visa within 7 days. All the paperwork was first and accurate. They were always there for me through the entire process and were knowledgeable about everything. If I had any queries, they always used to reply promptly, no matter how many times I approached. Thanks again for helping me achieve my dreams and I strongly recommended Study In Pty Ltd. To those who are planning to study abroad. Nazmus Sadat Master of Business Analytics University of Wollongong
Paul Cp
Paul Cp
2023-08-24
Thanks to Study In . I achieved my Cert IV through RPL which helped me for my professional career.Thanks to Saswati for the guidance and the quick responses for the queries. I referred my friends and they all are happy. Thanks once again
Captivating Videos
Captivating Videos
2023-08-15
Asif, from Studying was an absolute delight to work with. He displayed transparency, professionalism, ensured all inquiries were answered to in a prompt manner and additionally always provided updates to you without the need to chase. I am glad to have been referred to Studyin.

OUR AFFILIATED INSTITUTES / COLLEGES / UNIVERSITIES

Check Your Eligibility Now

Qualifications Skills Review